Korea to Germany Import Duty 2026: KOREU FTA, CBAM, VAT
Korea to Germany under the Korea-EU FTA (entered into force July 2011, fully phased) zeros MFN duty on almost all goods. Plus CBAM on steel and aluminum. Plus 19 percent German VAT. Here is the full landed cost stack with worked examples for steel, cars, electronics, and machinery.
Try the calculator
Run a real calculation for this lane in under a minute. Free, no card.
Open calculatorKorea to Germany Import Duty 2026: KOREU FTA, CBAM, VAT
The Korea-EU Free Trade Agreement (KOREU) has eliminated MFN duty on approximately 99 percent of bilateral trade since its 2011 entry into force and 2016 full phase-in. Korea is one of the EU's top six non-EU trading partners. Germany is the largest EU destination for Korean exports across cars, machinery, electronics, and chemicals.
This guide covers the KOREU FTA framework, the rules of origin, the CBAM exposure on steel and aluminum, the EU AD/CVD posture, and worked examples for the top Korean export categories.
The duty stack
| Layer | Rate | Notes |
|---|---|---|
| EU MFN duty (under KOREU FTA) | 0 percent on most lines | Self-certification by approved exporter |
| EU AD/CVD | Limited active orders against Korean origin | TDI database |
| EU steel safeguard | TRQ system | Within quota free |
| CBAM | Per ETS reference price on embedded emissions | K-ETS credit applies |
| German VAT | 19 percent standard | On customs value plus duty plus CBAM |
Worked example: Korean car into Germany
35,000 EUR Hyundai Genesis G80 sedan, manufactured in Ulsan, HTS 8703.23. KOREU origin (Korean-produced).
| Charge | Rate | Base | Amount (EUR) |
|---|---|---|---|
| EU MFN (KOREU) | 0 percent | 35,000 | 0 |
| AD/CVD | N/A on passenger cars | 0 | 0 |
| German VAT | 19 percent | 35,000 | 6,650 |
| Total | 6,650.00 |
Effective rate 19 percent (recoverable VAT for business buyer; final consumer pays). The KOREU MFN waiver is worth 10 percent of vehicle invoice for the importer (EU MFN on cars is 10 percent without KOREU). On a 35,000 EUR car, that is 3,500 EUR per vehicle.
The KOREU FTA is the structural reason Korean OEMs (Hyundai, Kia, Genesis) are competitive in the German consumer car market. Without KOREU, the 10 percent MFN would close the price gap with German domestic alternatives.
Worked example: Korean steel into Germany
500,000 EUR of HTS 7208.39 hot-rolled steel coil from POSCO Korea. 2,500 tonnes.
| Charge | Rate | Base | Amount (EUR) |
|---|---|---|---|
| EU MFN (KOREU) | 0 percent | 500,000 | 0 |
| AD/CVD | N/A on Korean HR coil | 0 | 0 |
| EU steel safeguard | 25 percent over quota | 500,000 | 0 (assume within quota) |
| CBAM (verified 1.85 tCO2e per tonne, ETS 88 EUR, less K-ETS 12 EUR credit) | computed | per tonne | 351,500 |
| German VAT | 19 percent | 851,500 | 161,785 |
| Total | 513,285.00 |
Effective rate 103 percent of original invoice value. The CBAM layer is the binding cost on Korean steel into Germany despite KOREU preference. Korean producers benefit from the K-ETS credit (12 EUR/tCO2e) but the net CBAM is still material.
Worked example: Korean machinery into Germany
500,000 EUR of HTS 8457.10 CNC machining center from Doosan Machine Tools.
| Charge | Rate | Base | Amount (EUR) |
|---|---|---|---|
| EU MFN (KOREU) | 0 percent | 500,000 | 0 |
| AD/CVD | N/A | 0 | 0 |
| German VAT | 19 percent | 500,000 | 95,000 |
| Total | 95,000.00 |
Effective rate 19 percent (recoverable VAT). Korean machine tools are price-competitive with German domestic supply on the same KOREU-zero MFN. The win for Korean producers is the FOB price advantage; the win for German buyers is the same total landed cost as German domestic plus broader supplier choice.
Worked example: Korean electronics into Germany
200,000 EUR of Samsung-branded HTS 8517.62 smart-home devices (origin Vietnam-manufactured but sold via Samsung Korea... wait, this needs to be of Korean origin to use KOREU).
Reframe: 200,000 EUR of HTS 8528.72 OLED TV panels from LG Display Korea. Korean origin.
| Charge | Rate | Base | Amount (EUR) |
|---|---|---|---|
| EU MFN (KOREU) | 0 percent | 200,000 | 0 |
| German VAT | 19 percent | 200,000 | 38,000 |
| Total | 38,000.00 |
Effective rate 19 percent (recoverable). KOREU MFN waiver is worth 14 percent of TV invoice value (EU MFN on TVs is 14 percent without KOREU). Significant cost advantage for Korean display imports.
KOREU rules of origin
KOREU origin requires:
- Wholly obtained or produced in Korea (or EU partner), or
- Sufficient working or processing per the product-specific rules in KOREU Protocol Annex II.
Common patterns:
- Chapter 87 vehicles: RVC of 45 to 55 percent depending on subheading.
- Chapter 84 to 85 machinery: tariff shift to the heading plus 45 to 55 percent RVC.
- Chapter 72 to 73 steel: melt and pour in KOREU territory, or substantial transformation from non-originating substrate.
- Chapter 39 plastics: chemical reaction or substantial transformation from non-originating resin.
- Chapter 28 to 29 chemicals: chemical reaction in KOREU territory.
The Korean producer issues a self-certification (approved exporter declaration on the commercial invoice) for shipments above 6,000 EUR. Below that, importer declaration suffices. No third-party certificate (unlike the EUR.1 form used in some other EU FTAs).
CBAM and the K-ETS credit
Korea's K-ETS (Korea Emissions Trading Scheme) has been active since 2015. The 2026 carbon price runs approximately 12 EUR/tCO2e (well below EU ETS at 88 EUR but credited against CBAM).
For Korean steel, the K-ETS credit reduces CBAM by 12 EUR/tCO2e. On a 1.85 tCO2e/tonne crude steel emissions intensity, the K-ETS credit is 22 EUR per tonne. The net CBAM is 88 minus 12 equals 76 EUR per tCO2e, or 141 EUR per tonne of crude steel.
Korean steel producers have invested heavily in EAF capacity and hydrogen-reduction pilot programs that lower the verified emissions further. Supplier-verified values from POSCO and Hyundai Steel are typically 1.7 to 1.9 tCO2e per tonne for crude steel, below the published default value of 1.78.
Documentation German Zoll wants
- Commercial invoice (EU 18 fields plus EORI, TARIC, KOREU origin declaration if claiming preference).
- Packing list.
- Bill of lading or airway bill.
- KOREU approved exporter declaration on invoice for shipments above 6,000 EUR.
- CBAM certificate for steel, aluminum, cement, fertilizer, hydrogen.
- For AD-covered Korean steel: producer-specific rate documentation.
Run your Korea to Germany shipment now
The LandedFees calculator handles KOREU FTA preference, the rule of origin checks per HS line, the CBAM stack with K-ETS credit, and the German VAT calculation.
Calculate a Korea to Germany shipment
Citations
- Korea-EU Free Trade Agreement (KOREU): https://policy.trade.ec.europa.eu/eu-trade-relationships-country-and-region/countries-and-regions/south-korea_en
- KOREU Annex II (product-specific rules of origin): EU Official Journal
- EU CBAM regulation (EU) 2023/956
- Korea K-ETS Ministry of Environment: https://www.me.go.kr
- EU Trade Defence Investigations: https://trade.ec.europa.eu/access-to-markets/en/content/eu-trade-defence-investigations
- German Zoll: https://www.zoll.de
Frequently asked questions
What does the Korea-EU FTA do?
The Korea-EU Free Trade Agreement (KOREU FTA) entered into force July 2011 with a 5- to 10-year phase-in. As of 2026, the agreement is fully implemented. Approximately 99 percent of Korea to EU trade is duty-free at MFN. Korea was the EU's largest trade agreement at signing.
What rule of origin applies?
KOREU FTA uses a product-specific rule per HS heading. Most chapter 84 to 85 machinery requires tariff shift plus regional value content. Chapter 87 vehicles use a 45 to 55 percent RVC threshold. Chapter 72 to 73 steel requires substantial transformation including melt and pour in KOREU territory.
Is CBAM applicable on Korean goods?
Yes. KOREU FTA preference does not exempt CBAM. Korean steel, aluminum, cement, fertilizer, hydrogen exporters pay CBAM certificates on embedded emissions. The Korean K-ETS carbon price (~12 EUR/tCO2e in 2026) is credited against CBAM. Korean producers have relatively low default values (1.78 tCO2e per tonne crude steel) reflecting modern EAF capacity.
Are there active EU trade remedies against Korean goods?
Limited. Active EU AD/CVD against Korean-origin: certain stainless steel sheet, certain seamless steel pipe, certain other narrow product categories. Check the EU TDI database for the specific product before importing.
What is the certificate of origin requirement?
Approved exporter declaration on the invoice or origin declaration on a separate document for shipments above 6,000 EUR. Below 6,000 EUR, an importer declaration of origin is sufficient. The KOREU model uses self-certification by approved exporters rather than a third-party certificate.
Ready to calculate?
Get a real number for your shipment in under a minute.
Free, no card, full breakdown of duty, VAT, freight, and fees.
Related guides
Country Pair Guides
Vietnam to UK Import Duty 2026: CPTPP Preference, UK Tariff, VAT
Vietnam to UK imports benefit from the UK's CPTPP accession (December 2024). Most Vietnamese exports now enter UK duty-free under CPTPP preference. Plus 20 percent VAT. Here is the full landed cost stack with worked examples for footwear, apparel, electronics, and furniture.
Country Pair Guides
Turkey to Germany Import Duty 2026: Customs Union, CBAM, VAT
Turkey is part of the EU-Turkey Customs Union covering most industrial goods. Turkish industrial imports to Germany pay zero MFN duty under the Customs Union. CBAM applies to steel and aluminum. Here is the full landed cost stack with worked examples for steel, textiles, machinery, automotive parts.
Country Pair Guides
India to Germany Import Duty 2026: EU MFN, GSP+ Removal, and CBAM
India to Germany imports pay EU Common External Tariff MFN. India lost EU GSP+ benefits effective 2024. Plus 19 percent German VAT. CBAM applies on steel and aluminum. Here is the full landed cost stack with worked examples for pharma APIs, textiles, machinery, and steel.
Country Pair Guides
India to Australia Import Duty 2026: AI-ECTA Preference, GST, Trade Remedies
India to Australia under the Australia-India Economic Cooperation and Trade Agreement (AI-ECTA, in force December 2022) zeros MFN duty on roughly 96 percent of Australian exports to India and 100 percent of Indian exports to Australia. Plus 10 percent Australian GST. Here is the full landed cost stack.