Chinese Chassis and Subassemblies: AD and CVD Orders A-570-135 and C-570-136 Continued
Commerce continued both the antidumping and countervailing duty orders on certain chassis and subassemblies from China (A-570-135, C-570-136), applicable November 2, 2026 (91 FR 73202). Scope, HTSUS lines, component rules, and landed-cost mechanics.
Try the calculator
Run a real calculation for this lane in under a minute. Free, no card.
Open calculatorChinese Chassis and Subassemblies: AD and CVD Orders A-570-135 and C-570-136 Continued
Both trade remedy orders on certain chassis and subassemblies from China will stay in place for another five-year cycle. Commerce published the continuation notice on November 13, 2026 (FR Doc 2026-23177, 91 FR 73202 to 73203), covering the antidumping order A-570-135 and the countervailing duty order C-570-136.
This was the first sunset review since the orders were issued in 2021. Because there are two orders, a covered chassis carries two separate cash deposits, one AD and one CVD, on top of everything else owed at entry.
What the notice says
| Item | Detail |
|---|---|
| Federal Register citation | 91 FR 73202 to 73203, FR Doc 2026-23177 |
| Publication date | November 13, 2026 |
| Case numbers | A-570-135 (AD), C-570-136 (CVD) |
| Action | Continuation of AD and CVD orders |
| Effective date of continuation | November 2, 2026 |
| Original AD order | 86 FR 36093 (July 8, 2021) |
| Original CVD order | 86 FR 24844 (May 10, 2021) |
| Review | First sunset review, initiated April 1, 2026 (91 FR 16181) |
| Commerce CVD sunset final results (expedited) | 91 FR 47814 (July 29, 2026) |
| ITC determination | 91 FR 68983 (November 2, 2026) |
| Deposit instruction | CBP to continue collecting AD and CVD cash deposits at the rates in effect at time of entry |
| HTSUS listed | 8716.39.0090, 8716.90.5060, and 8716.90.5010 |
Commerce determined that revocation would likely lead to continuation or recurrence of dumping and countervailable subsidies. The ITC determined that revocation would likely lead to continuation or recurrence of material injury within a reasonably foreseeable time. The notice does not restate any margin or subsidy rate.
What is in scope
The orders cover chassis and subassemblies, finished or unfinished, assembled or unassembled, coated or uncoated, regardless of the number of axles, for carriage of containers or other payloads (including self-supporting payloads) for road, marine roll-on/roll-off, or rail transport.
The scope names these subassemblies:
- Chassis frames or frame sections, including kingpin assemblies, bolsters, goosenecks, drop assemblies, extension mechanisms, and rear impact guards.
- Running gear or axle assemblies, fixed, sliding, or lifting, with or without suspension, wheel end components, slack adjusters, axles, brake chambers, locking pins, tires, and wheels.
- Landing gear assemblies that support the chassis when it is not hooked to a tractor.
- Assemblies that connect a chassis to a converter dolly or another chassis, such as pintle hooks or B-trains with a fifth wheel.
Three rules in the scope text matter most in practice:
- One subassembly is enough. Importing any listed subassembly, assembled or unassembled, constitutes an unfinished chassis.
- Processing does not take it out. Trimming, cutting, grinding, drilling, painting, coating, assembly, or other processing, whether in China or a third country, does not remove the product from scope. Adding components not listed does not remove it either.
- Loose components depend on context. Individual components entered and sold by themselves are not subject. The same components entered with, or for further assembly with, a finished or unfinished chassis are subject merchandise.
Dry van trailers, refrigerated van trailers, and flatbed (platform) trailers are excluded, each defined in the scope by its enclosed cargo space or its permanently incorporated loading deck.
What it means for your landed cost
AD and CVD cash deposits are both ad valorem charges on the entered value. They are additive with each other and with every other duty on the entry. For a Chinese chassis the mechanical stack is:
- MFN duty at the general rate for the 8716 line.
- Any other duty layers on Chinese-origin goods that apply to that line, each on the same entered value.
- AD cash deposit at the rate in effect at time of entry for the producer and exporter.
- CVD cash deposit at the rate in effect at time of entry for the producer and exporter.
- Merchandise processing fee and harbor maintenance fee, where applicable.
Anyone pricing a fleet order should model both deposit lines separately, using the current rates for the named producer, rather than treating "trade remedy" as one number.
Deposits are estimates. Final AD and CVD liability is fixed at liquidation and can differ from the deposit, which leaves an open exposure on each entry until it liquidates.
Scope and classification risk
The notice states that the HTSUS subheadings are for convenience and customs purposes and that the written description is dispositive. For chassis, the classification risk is less about the 8716 number and more about how the goods are shipped.
- Split shipments. Frames on one bill of lading and running gear on another can still be in scope. Each listed subassembly on its own is an unfinished chassis. Components shipped for further assembly with a chassis are subject even if they would be out of scope sold alone.
- Third-country finishing. Painting or assembling Chinese subassemblies elsewhere does not change scope status under the order text.
- Trailer type. The exclusions are written around specific features. A trailer with partial enclosure or a removable deck should be checked against the definitions, not against its marketing name.
Keep a bill of materials that shows where each subassembly was made, and ask Commerce for a scope ruling when a product does not clearly fit an exclusion.
Next review
Commerce intends to initiate the next five-year reviews not later than 30 days before the fifth anniversary of the date of the last ITC determination. The notice gives no specific date.
Primary source
Federal Register, 91 FR 73202, FR Doc 2026-23177: https://www.federalregister.gov/documents/2026/11/13/2026-23177/certain-chassis-and-subassemblies-thereof-from-the-peoples-republic-of-china-continuation-of
Frequently asked questions
Are the AD and CVD orders on Chinese chassis still in effect?
Yes. Commerce published a continuation notice on November 13, 2026 (FR Doc 2026-23177, 91 FR 73202) for both orders, A-570-135 and C-570-136. The continuation is effective November 2, 2026, the date the ITC published its final determination.
Was this the first sunset review?
Yes. The CVD order was published May 10, 2021 (86 FR 24844) and the AD order on July 8, 2021 (86 FR 36093). Commerce initiated the first sunset review on April 1, 2026 (91 FR 16181).
What deposit rates apply after continuation?
The notice does not publish new rates. Commerce will instruct CBP to continue collecting AD and CVD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.
Are individual chassis components covered?
Individual components entered and sold by themselves are not subject to the orders. Components entered with or for further assembly with a finished or unfinished chassis are subject merchandise. Importing any listed subassembly, assembled or not, counts as an unfinished chassis.
Which trailers are excluded?
Dry van trailers, refrigerated van trailers, and flatbed (platform) trailers, each as defined in the scope text.
Ready to calculate?
Get a real number for your shipment in under a minute.
Free, no card, full breakdown of duty, VAT, freight, and fees.
Related guides
Regulatory Explainers
Wooden Cabinets and Vanities From China: Final CVD Review Results for 2024 (C-570-107)
Commerce issued final results of the 2024 countervailing duty review on wooden cabinets and vanities from China (C-570-107, 91 FR 73553). Company rates of 5.48 and 113.08 percent, an 18.75 percent all-others deposit, effective November 16, 2026.
Regulatory Explainers
Wrong AD/CVD Scope on Your Entries: Detection and 19 USC 1520(d) Recovery
Anti-dumping and countervailing duty scope errors are the highest-dollar liquidation surprise in the US import stack. This guide walks through scope determination mechanics, the detection patterns the LandedFees engine flags, and the four post-entry recovery mechanisms in order of applicability.
Regulatory Explainers
What Was Section 122? The 2026 Reciprocal Tariff in the Past Tense
Section 122 of the Trade Act of 1974 was a temporary import surcharge in force from February 24 to July 24 2026. The rate was announced at 15 percent in the February 22 amendment, but HTS 9903.03.01 only implemented 10 percent, and 10 percent is what CBP actually collected. It expired at the 150-day statutory ceiling. Here is what happened, why it ended, and what replaced it (nothing).
Regulatory Explainers
Section 338 Canada Tariff: The Product Scope Beyond Motor Vehicles, Dairy, and Alcoholic Beverages
The three July 20 2026 presidential proclamations under Section 338 of the Tariff Act of 1930 impose 50 percent ad valorem duties on Canadian-origin goods effective August 19 2026 at 12:01 AM EDT. Headlines focus on motor vehicles, dairy, and alcoholic beverages, but the annex reach extends to wine, hockey sticks, cement, plywood, furniture, fishing rods, seeds, clothing, wigs, and swimming pools. USMCA does not exempt covered goods. This walkthrough covers the wider annex scope, FTZ privileged foreign admission timing, and rerun landed-cost math with S338 stacked on existing S232 and S301 layers.
