LandedFees
APILog inStart a calculation
All guides/Regulatory Explainers

Diamond Sawblades From China: Antidumping Order A-570-900 Continued After Third Sunset Review

Commerce continued the antidumping duty order on diamond sawblades and parts thereof from China (A-570-900), applicable October 30, 2026 (91 FR 73551). Here is the scope, the HTSUS numbers it lists, the deposit rule, and what it means for landed cost.

Updated 2026-11-175 min read
ad-cvdchinaantidumpingdiamond-sawblades

Try the calculator

Run a real calculation for this lane in under a minute. Free, no card.

Open calculator

Diamond Sawblades From China: Antidumping Order A-570-900 Continued After Third Sunset Review

The antidumping duty order on diamond sawblades and parts thereof from China survived its third five-year review. Commerce published the continuation notice on November 16, 2026 (FR Doc 2026-23253, 91 FR 73551 to 73552). The order has been in place since November 2009, and CBP will keep collecting AD cash deposits on subject imports.

If you buy cutting blades, cores, or segments from Chinese producers, this notice is a signal that nothing about your deposit obligation went away. Below is what the notice says and how it lands in a shipment's cost.

What the notice says

ItemDetail
Federal Register citation91 FR 73551 to 73552, FR Doc 2026-23253
Publication dateNovember 16, 2026
Case numberA-570-900
ActionContinuation of antidumping duty order
Effective date of continuationOctober 30, 2026
Original order74 FR 57145 (November 4, 2009)
ReviewThird sunset review, initiated March 2, 2026
Commerce final results (expedited)91 FR 40976 (July 6, 2026)
ITC determination91 FR 68557 (October 30, 2026)
Deposit instructionCBP continues to collect AD cash deposits at the rates in effect at time of entry
Typical HTSUS8202.39.00.00 (also 8206.00.00.00 for retail sets)

Commerce found that revoking the order would likely lead to continuation or recurrence of dumping, and the ITC found that revocation would likely lead to continuation or recurrence of material injury to a U.S. industry within a reasonably foreseeable time. With both findings affirmative, section 751(d)(2) of the Tariff Act requires continuation.

The notice does not publish dumping margins or company rates. It points back to the rates already in effect at the time of entry.

What is in scope

The order covers all finished circular sawblades, slotted or not, with a working part made of a diamond segment or segments, and parts thereof, regardless of specification or size. Semi-finished blades are also in, including:

  • Diamond sawblade cores: circular steel plates with slots, whether or not attached to non-steel plates, made principally (not exclusively) from alloy steel.
  • Diamond sawblade segments: a mixture of diamonds (natural or synthetic, any quantity) and metal powders such as iron, cobalt, nickel, or tungsten carbide, formed together into a solid shape, generally by heating and pressing.

The scope lists five exclusions:

  1. Blades with diamonds attached directly to the core by a resin or electroplated bond, so there is no diamond segment.
  2. Blades or cores thinner than 0.025 inches or thicker than 1.1 inches.
  3. Circular steel plates with a non-diamond cutting edge, such as external teeth protruding from the outer diameter.
  4. Cores with a Rockwell C hardness below 25.
  5. Blades or segments whose diamonds predominantly have a mesh size number greater than 240 (for example 250 or 260).

What it means for your landed cost

An AD cash deposit is an ad valorem charge on the entered value of the goods. It is collected at entry summary alongside your regular duties and it does not replace any of them. For a Chinese diamond sawblade, the stack looks like this mechanically:

  1. MFN duty at the general rate for the HTSUS line.
  2. Any other duty layers on Chinese-origin goods that apply to that line, each computed on the same entered value.
  3. The AD cash deposit at the rate in effect for your producer and exporter combination at the time of entry.
  4. Merchandise processing fee and harbor maintenance fee, where applicable.

Each layer adds percentage points against the same base. If the AD rate for your supplier is high, it can be larger than all the other layers combined, so it has to be in the quote before you place the order, not discovered at the broker's desk.

Two points specific to this notice:

  • The rate is the one in effect at entry. The continuation does not reset or average anything. If an administrative review later changes your supplier's rate, the new rate applies to entries made after it takes effect.
  • A deposit is not the final bill. Deposits are estimates. The final duty is set when entries are liquidated, which can be higher or lower than what you deposited. Budget for the possibility of a bill or a refund months after the goods are sold.

Scope and classification risk

The notice is explicit that the HTSUS numbers are provided for convenience and customs purposes and that the written scope description is dispositive. That cuts both ways.

  • A product classified outside 8202.39 can still be in scope. Commerce added 6804.21 numbers to the customs case reference file at CBP's request. Segments and cores shipped on their own are named in the scope.
  • A product under 8202.39 can be out of scope if it meets an exclusion. Resin-bond and electroplated blades with no diamond segment are one example. You need documents that show it: bond type, core thickness, core hardness, diamond mesh size.
  • Retail sets matter. When blades come packaged with items from headings 8202 to 8205, the set may enter under 8206.00.00.00, and the blade is still subject merchandise.

The practical controls are a spec sheet from the producer that addresses each exclusion criterion, a clear producer and exporter name on the commercial invoice so the broker can match the right deposit rate, and a scope ruling request to Commerce when a product sits near one of the lines.

Next review

Commerce says it intends to initiate the next five-year review not later than 30 days before the fifth anniversary of the date of the last ITC determination. The notice does not give a date. Until then, plan as if the order stays in force.

Primary source

Federal Register, 91 FR 73551, FR Doc 2026-23253: https://www.federalregister.gov/documents/2026/11/16/2026-23253/diamond-sawblades-and-parts-thereof-from-the-peoples-republic-of-china-continuation-of-antidumping

Frequently asked questions

Is the antidumping order on Chinese diamond sawblades still in force?

Yes. Commerce published a continuation notice on November 16, 2026 (FR Doc 2026-23253, 91 FR 73551) for case A-570-900. The continuation is effective October 30, 2026, the date the ITC published its determination that revocation would likely lead to continuation or recurrence of material injury.

Which sunset review was this?

The third. The order was first published on November 4, 2009 (74 FR 57145). The ITC instituted, and Commerce initiated, the third sunset review on March 2, 2026. Commerce issued expedited final results on July 6, 2026 (91 FR 40976).

What cash deposit rate applies now?

The notice does not set a new rate. It says CBP will continue to collect AD cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. Check the current rate for your specific producer and exporter before entry.

Which HTSUS numbers does the scope mention?

Heading 8202.39.00.00 is the typical one. Sets packaged for retail with items from headings 8202 to 8205 may enter under 8206.00.00.00. Commerce also added 6804.21.00.00, 8202.39.0040, 8202.39.0070, 6804.21.0010 and 6804.21.0080 to the customs case reference file at CBP's request. The written scope description, not the HTS number, is dispositive.

When is the next sunset review?

Commerce says it intends to initiate the next five-year review not later than 30 days before the fifth anniversary of the date of the last ITC determination. The notice does not give a calendar date.

Ready to calculate?

Get a real number for your shipment in under a minute.

Free, no card, full breakdown of duty, VAT, freight, and fees.

Related guides

Regulatory Explainers

Wooden Cabinets and Vanities From China: Final CVD Review Results for 2024 (C-570-107)

Commerce issued final results of the 2024 countervailing duty review on wooden cabinets and vanities from China (C-570-107, 91 FR 73553). Company rates of 5.48 and 113.08 percent, an 18.75 percent all-others deposit, effective November 16, 2026.

Regulatory Explainers

Wrong AD/CVD Scope on Your Entries: Detection and 19 USC 1520(d) Recovery

Anti-dumping and countervailing duty scope errors are the highest-dollar liquidation surprise in the US import stack. This guide walks through scope determination mechanics, the detection patterns the LandedFees engine flags, and the four post-entry recovery mechanisms in order of applicability.

Regulatory Explainers

What Was Section 122? The 2026 Reciprocal Tariff in the Past Tense

Section 122 of the Trade Act of 1974 was a temporary import surcharge in force from February 24 to July 24 2026. The rate was announced at 15 percent in the February 22 amendment, but HTS 9903.03.01 only implemented 10 percent, and 10 percent is what CBP actually collected. It expired at the 150-day statutory ceiling. Here is what happened, why it ended, and what replaced it (nothing).

Regulatory Explainers

Section 338 Canada Tariff: The Product Scope Beyond Motor Vehicles, Dairy, and Alcoholic Beverages

The three July 20 2026 presidential proclamations under Section 338 of the Tariff Act of 1930 impose 50 percent ad valorem duties on Canadian-origin goods effective August 19 2026 at 12:01 AM EDT. Headlines focus on motor vehicles, dairy, and alcoholic beverages, but the annex reach extends to wine, hockey sticks, cement, plywood, furniture, fishing rods, seeds, clothing, wigs, and swimming pools. USMCA does not exempt covered goods. This walkthrough covers the wider annex scope, FTZ privileged foreign admission timing, and rerun landed-cost math with S338 stacked on existing S232 and S301 layers.