H305255

DRA 2 H305255 SMS OT:RR:CTF:ER HQ H305255 April 22, 2020 Simplified General Manufacturing Drawback Ruling Under 19 U.S.C. 1313(b) for Component Parts (CBP Dec. 20-07) A. Description of Component Parts Imported merchandise, drawback products, or substituted merchandise to be designated as the basis for drawback in the manufacture of the exported (or destroyed) products. II. Substitution Requirements. The manufacturer or producer hereby agrees to the below listed substitution requirements: The manufacturer or producer must identify all the imported and substituted component parts by description that will be used within the Process of Manufacture or Production of the exported (or destroyed) article. The proposed substitution of component parts cannot alter the Process of Manufacture or Production. The substituted components used in producing the exported (or destroyed) articles on which drawback is claimed must be classifiable under the same 8-digit HTSUS classification number as the designated components. Specifications, drawings, or other documentation describing the substituted components maintained in the normal course of business will be maintained and made available for CBP Officials to verify classification of products. In order to obtain drawback it is necessary to prove that the merchandise, which is to be substituted for the imported merchandise or drawback products, is classifiable under the same 8-digit HTSUS classification. To enable CBP to verify the required identity of the 8-digit HTSUS classification of the substituted merchandise for which it is being substituted, the applicant must attach to this ruling request a representative Bill of Materials (BOM) and/or Formulas for each distinct Process of Manufacture, which is an exhaustive list of all merchandise used in the Process of Manufacture, as defined under 19 CFR 190.2, identifying by 8-digit HTSUS number each component or element, material, chemical, mixture, or other substance incorporated into the manufactured article. However, the 8-digit HTSUS classification numbers referenced in the BOM/Formula will not be confirmed by CBP upon approval of this manufacturing ruling, but are subject to verification during claim processing. Any HTSUS provisions referenced in BOMs/Formulas submitted with drawback manufacturing rulings issued under 19 CFR 190 are information provided by the requester. To obtain a binding ruling on the tariff classification of this merchandise, a request may be submitted in accordance with 19 CFR 177.2. The manufacturer or producer will submit an updated representative BOM and/or Formula, to the Drawback Office which liquidates its claims, in the event that there are any changes to the components, elements, materials, chemicals, mixtures, or other substances incorporated into the manufactured article in the Process of Manufacture and being claimed for drawback, or to their proposed 8-digit HTSUS classification. B. Exported Articles on Which Drawback Will Be Claimed The exported articles will have been manufactured in the United States using components described in Subpart A of this ruling. C. General Statement The manufacturer or producer manufactures or produces for its own account. The manufacturer or producer may manufacture or produce articles for the account of another or another manufacturer or producer may manufacture or produce for the account of the manufacturer or producer under contract within the principal and agency relationship outlined in T.D.s 55027(2) and 55207(1) (see § 190.9 of this part). CBP Office Where Drawback Claims will be Processed (The four offices where drawback claims will be processed and liquidated are located at: Newark/New York, NY; Houston TX; Chicago, IL; San Francisco, CA) E. Process of Manufacture or Production The components described in Subpart A will be used to manufacture or produce articles in accordance with § 190.2 of this part. F. Multiple Products Not applicable. G. Waste No drawback is payable on any waste which results from the manufacturing operation. Unless the claim for drawback is based on the quantity of components appearing in the exported articles, records will be maintained to establish the value (or the lack of value), the quantity, and the disposition of any waste that results from manufacturing the exported articles. If no waste results, records will be maintained to establish that fact. H. Procedures and Records Maintained Records, which may include records kept in the normal course of business, will be maintained to establish: 1. The identity, specifications, and 8-digit HTSUS classification of the designated merchandise; 2. The quantity of merchandise classifiable under the same 8-digit HTSUS classification as the designated merchandise used to produce the exported articles; 3. That, within 5 years after the date of importation of the designated merchandise, the manufacturer or producer used the merchandise to produce articles. During the same 5-year period, the manufacturer or producer produced the exported articles. To obtain drawback the claimant must establish that the completed articles were exported within 5 years after the importation of the imported merchandise. Records establishing compliance with these requirements will be available for audit by CBP during business hours. Drawback is not payable without proof of compliance. I. Inventory Procedures The inventory records of the manufacturer or producer must show how the drawback recordkeeping requirements set forth in 19 U.S.C. 1313(b) and part 190 of the CBP Regulations will be met, as discussed under the heading “Procedures And Records Maintained”. If those records do not establish satisfaction of those legal requirements, drawback cannot be paid. J. Basis of Claim for Drawback Drawback will be claimed on the quantity of eligible components used in producing the exported articles only if there is no waste or valueless or unrecovered waste in the manufacturing operation. Drawback may be claimed on the quantity of eligible components that appear in the exported articles, regardless of whether there is waste, and no records of waste need be maintained. If there is valuable waste recovered from the manufacturing operation and records are kept which show the quantity and value of the waste, drawback may be claimed on the quantity of eligible components used to produce the exported articles less the amount of those components which the value of the waste would replace. K. General Requirements The manufacturer or producer will: 1. Comply fully with the terms of this general ruling when claiming drawback; 2. Open its factory and records for examination at all reasonable hours by authorized Government officers; 3. Keep its drawback related records and supporting data for at least 3 years from the date of liquidation of any drawback claim predicated in whole or in part upon this general ruling; 4. Keep its letter of notification of intent to operate under this general ruling current by reporting promptly to the drawback office which liquidates its claims any changes in the information required by the General Instructions of this Appendix to be included therein (I. General Instructions, 1 through 10) or the corporate name or corporate organization by succession or reincorporation; 5. Keep a copy of this general ruling on file for ready reference by employees and require all officials and employees concerned to familiarize themselves with the provisions of this general ruling; and 6. Issue instructions to insure proper compliance with title 19, United States Code, section 1313, part 190 of the CBP Regulations and this general ruling. DECLARATION OF OFFICIAL I declare that I have read this application for a general manufacturing drawback ruling; that I know the averments and agreements contained herein are true and correct; and that my signature on this __ day of ____ 20__, makes this application binding on (Name of Applicant Corporation, Partnership, o