N365605

U.S. Department of Homeland Security U.S. Customs and Border Protection National Commodity Specialist Division One World Trade Center, Suite 51.201 New York, NY 10007 U.S. Customs and Border Protection N365605 October 9, 2026 OT:RR:NC:N1:105 CATEGORY: Origin Icey Huang Autowin Group Limited Flat/RM 08, 15/F Witty Commercial Building 1A-1L Tung Choi Street Mongkok, Kowloon, Hong Kong China RE: The country of origin of a pressure gauge Dear Ms. Huang: In your letter dated October 1, 2026, you requested a country of origin ruling on a pressure gauge. Descriptive literature was provided for our review. The item under consideration is described as a pressure gauge (item number 1111200195), which is a mechanical instrument designed to measure and display fluid or gas pressure. It features a 50mm dial with a measurement range of 0 to 160 PSI and utilizes a copper Bourdon tube as its internal sensing element, which expands or contracts in response to pressure changes to drive the dial pointer. The internal mechanism is housed in a carbon steel gauge case and connects to external systems via a 1/4-inch bottom mount featuring a 1/4" NPT-18 TPI brass inlet fitting. The configuration constitutes a complete gauge designed to be permanently or semi-permanently threaded into piping or machinery to provide real-time pressure readings without electrical components. The pressure gauge is made from components sourced from China and Malaysia. The Chinese components include the carbon steel (for the gauge case and retaining ring), gauge lens, dial assembly, screws, movement assembly, and Bourdon tube. The inlet fitting is made from Malaysian brass bar stock. All of the Chinese components are then sent to Malaysia where the metal components are constructed by stamping, forming, trimming, deburring and coating. Welding of the Chinese-sourced Bourdon tube to the inlet fitting is also undertaken forming a key functional component of the gauge. The Malaysian brass bar stock is then CNC machined by precision drilling the parts, deburring and inspecting. Once the metal components are made, they are then assembled with the remaining Chinese components to form the complete pressure gauge. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article. Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlaender & Co., 27 C.C.P.A. 297, 302 (1940). Part 134 of the U.S. Customs and Border Protection (CBP) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States. Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations. Based upon your description of the manufacturing operations, we note that a significant amount of the components that comprise the pressure gauge are manufactured (CNC machined and stamped) in Malaysia. Additionally, these components along with the Chinese gauge lens, dial assembly, movement assembly and Bourdon tube, emerge with a new name, character, and use, different from those possessed by the raw metal material. Thus, based on the totality of the circumstances, the country of origin of the pressure gauge (item number 1111200195) will be Malaysia. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Jason Christie at jason.m.christie@cbp.dhs.gov. Sincerely, (for) James P. Forkan Director National Commodity Specialist Division

is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article. Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlaender & Co., 27 C.C.P.A. 297, 302 (1940). Part 134 of the U.S. Customs and Border Protection (CBP) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States. Further work or material added to an article in another country must effect a substantial transformation in order to render such oth