LandedFees
APILog inStart a calculation
All guides/Regulatory Explainers

Railway Tank Cars and Subassemblies From Mexico: AD and CVD Investigations Initiated (2026)

Commerce initiated antidumping (A-201-872, 91 FR 73538) and countervailing duty (C-201-873, 91 FR 73558) investigations on railway tank cars and subassemblies from Mexico. Alleged dumping margins of 11.97 to 31.72 percent, 23 subsidy programs, HTSUS 8606.10.0000 and related subheadings.

Updated 2026-11-185 min read
ad-cvdantidumpingcountervailing-dutymexico

Try the calculator

Run a real calculation for this lane in under a minute. Free, no card.

Open calculator

Railway Tank Cars and Subassemblies From Mexico: AD and CVD Investigations Initiated (2026)

Commerce has opened both an antidumping (less-than-fair-value) investigation and a countervailing duty investigation on certain railway tank cars and subassemblies from Mexico. The two initiation notices were published November 16, 2026 and are applicable November 9, 2026. The case covers finished cars and the major subassemblies, so rail equipment buyers and lessors should start tracking it now.

What the notices say

ItemAD investigationCVD investigation
Citation91 FR 73538 to 73543, FR Doc 2026-2329091 FR 73558 to 73562, FR Doc 2026-23291
Case numberA-201-872C-201-873
ApplicableNovember 9, 2026November 9, 2026
Petition filedSeptember 30, 2026September 30, 2026
PetitionerUTLX Manufacturing LLCUTLX Manufacturing LLC
Period of investigationJuly 1, 2025 to June 30, 2026January 1, 2025 to December 31, 2025
Alleged rateDumping margins of 11.97 to 31.72 percent23 subsidy programs initiated
Mandatory respondents (intended)Greenbrier and TrinityGreenbrier and Trinity
Commerce preliminaryNo later than 140 days after initiation, unless postponedNo later than 65 days after initiation, unless postponed

The product name changed during the petition stage. Both notices cite a "Product Name Change" memorandum dated October 23, 2026, and the earlier deadline extension notice (91 FR 67288, October 26, 2026) was titled "Certain Railway Tank Cars and Parts Thereof from Mexico." That extension, made October 20, 2026, added 20 days to the initiation deadline so Commerce could examine industry support.

Petitioner, opposition, and industry support

UTLX Manufacturing LLC filed on behalf of the domestic industry. Trinity Tank Car, Inc. (described as a U.S. producer, U.S. importer, and foreign producer of tank cars) and The Greenbrier Companies, Inc. (a U.S. producer and foreign producer) opposed the petitions and submitted their 2025 production. Commerce nonetheless found that supporters account for more than 50 percent of total domestic production, so no polling was needed.

Alleged injury indicators include rising subject import volume, lost market share, underselling, price depression and suppression, lost sales, and weaker production and employment.

Alleged margins and subsidies

AD. Export price is based on U.S. pricing for Mexican-produced tank cars, calculated ex-factory. Lacking home market or third-country prices, the petitioner used constructed value: its own production experience valued with public Mexican data, plus SG&A, financial expenses, and profit from the fiscal year 2025 statements of a comparable Mexican producer. The estimated margins range from 11.97 to 31.72 percent.

CVD. Commerce is investigating 23 subsidy programs alleged against the Government of Mexico. It held consultations with the Government of Mexico on October 16, 2026. Because of the nature of certain alleged programs, Commerce also wrote to the Government of China on September 30, 2026 regarding alleged transnational subsidy programs. China did not request a meeting but submitted comments. Mexico is a Subsidies Agreement Country, so the ITC must find injury for the CVD case to proceed.

The notices name Greenbrier and Trinity as the only known Mexican producers and exporters. Commerce intends to examine both individually. Comments on respondent selection were due within three business days of publication.

Scope and HTS numbers

The scope covers pressure and non-pressure railway tank cars, finished or unfinished, regardless of capacity, dimensions, tare weight, shell thickness, insulation, thermal protection, jacket configuration, underframe design, or compartment configuration. Subject cars meet or exceed DOT-111, DOT-115, DOT-117, AAR-206, AAR-211, DOT-105, DOT-109, DOT-112, DOT-114, or DOT-120, including substantially similar or later standards. In-scope DOT-111 cars have tank shells and heads primarily of non-stainless steel.

Subassemblies in scope:

  • Tank assemblies, finished or unfinished, whether or not insulated, jacketed, clad, lined, or fitted with a thermal protection system, and including tanks imported separately from the underframe
  • Underframe assemblies, finished or unfinished, built on a center sill or stub sills, with the attachments listed in the scope

Processing, refurbishment, or assembly in Mexico or a third country (welding, pressing, coating, painting, machining, re-jacketing, and similar) does not remove the product from scope. Missing a subassembly does not remove a tank car from scope either.

Excluded: DOT-111 cars with shells and heads primarily of stainless steel, DOT-105 and DOT-112 cars rated at 499 psig or greater, and DOT-113 cryogenic tank cars.

HTSUSRole in scope text
8606.10.0000Primary classification
7309.00.0030, 7309.00.0090May also enter
7311.00.0030, 7311.00.0060, 7311.00.0090May also enter
7326.90.8688May also enter
8607.99.1000May also enter
8609.00.0000May also enter

The scope text controls over the HTSUS listing.

Schedule and cash deposit timing

StepTiming as stated
Scope and product characteristics comments5:00 p.m. ET, November 30, 2026
Rebuttal comments5:00 p.m. ET, December 10, 2026
ITC preliminary injury determinationWithin 25 days after the ITC receives notice of initiation
Commerce CVD preliminaryNo later than 65 days after initiation, unless postponed
Commerce AD preliminaryNo later than 140 days after initiation, unless postponed

A negative ITC preliminary determination terminates the investigation. An initiation notice sets no cash deposit rate. Deposits would start only if Commerce issues an affirmative preliminary determination, and the eventual rates can differ from the alleged range.

The USMCA point

AD and CVD are separate from tariff preference. A valid USMCA origin claim affects ordinary duty, not AD/CVD exposure. If Mexican tank cars or subassemblies fall within an eventual order, the deposit applies whether or not the goods qualify under USMCA.

What importers should do

  1. Map every inbound tank car, tank assembly, and underframe assembly from Mexico against the scope standards and exclusions, not just 8606.10.0000.
  2. Flag subassemblies entering under 7309, 7311, 7326, 8607, or 8609. Those are named as possible entry numbers.
  3. Identify the producer. With only two known Mexican producers, your exposure will track their individual rates.
  4. Watch for re-jacketing or refurbishment in a third country. The scope says it does not change coverage.
  5. Price contracts for deliveries after the preliminary windows with a duty clause, since the alleged range is 11.97 to 31.72 percent before any CVD rate.
  6. Model a scenario in the calculator once preliminary rates publish.

Sources

Frequently asked questions

Who filed the petitions?

UTLX Manufacturing LLC, a domestic producer of tank cars, filed the AD and CVD petitions on September 30, 2026. Trinity Tank Car, Inc. and The Greenbrier Companies, Inc. opposed the petitions, but Commerce found the industry support requirements were met.

What dumping margins are alleged?

Based on the petitioner's data, Commerce states estimated dumping margins of 11.97 to 31.72 percent. Normal value was based on constructed value because the petitioner could not obtain home market or third-country prices. These are allegations, not deposit rates.

Which HTSUS numbers are covered?

The scope says subject merchandise is classified under 8606.10.0000 and may also enter under 7309.00.0030, 7309.00.0090, 7311.00.0030, 7311.00.0060, 7311.00.0090, 7326.90.8688, 8607.99.1000, and 8609.00.0000. The written scope is dispositive.

When are the preliminary determinations due?

The ITC preliminary injury determination is due within 25 days after it receives notice of initiation. Commerce's CVD preliminary determination is due no later than 65 days after initiation, and the AD preliminary determination no later than 140 days after initiation, unless postponed. Both investigations were initiated as of November 9, 2026.

Does USMCA origin exempt Mexican tank cars?

No. AD and CVD are remedies separate from tariff preference. A valid USMCA claim affects ordinary duty, not AD/CVD liability on merchandise within the scope of an investigation or order.

Ready to calculate?

Get a real number for your shipment in under a minute.

Free, no card, full breakdown of duty, VAT, freight, and fees.

Related guides

Regulatory Explainers

Hardwood and Decorative Plywood From China, Indonesia, and Vietnam: New AD and CVD Orders (2026)

Commerce issued antidumping and countervailing duty orders on hardwood and decorative plywood from China, Indonesia, and Vietnam (91 FR 73739 and 91 FR 73735). China-wide AD deposit 185.96 percent plus 88.96 percent CVD, Indonesia all-others 18.06 and 40.87 percent, Vietnam-wide 84.95 and 47.68 percent.

Regulatory Explainers

Corrugated Die-Cut Cardboard Boxes From China, Malaysia, and Turkey: ITC Preliminary Injury Determinations (2026)

The ITC made affirmative preliminary injury determinations on corrugated die-cut cardboard boxes (pizza and food service boxes) from China, Malaysia, and Turkey (Inv. Nos. 701-TA-806 and 731-TA-1805-1807, 91 FR 73797). HTSUS 4819.10. Commerce preliminaries come next.

Regulatory Explainers

Wooden Cabinets and Vanities From China: Final CVD Review Results for 2024 (C-570-107)

Commerce issued final results of the 2024 countervailing duty review on wooden cabinets and vanities from China (C-570-107, 91 FR 73553). Company rates of 5.48 and 113.08 percent, an 18.75 percent all-others deposit, effective November 16, 2026.

Regulatory Explainers

Diamond Sawblades From China: Antidumping Order A-570-900 Continued After Third Sunset Review

Commerce continued the antidumping duty order on diamond sawblades and parts thereof from China (A-570-900), applicable October 30, 2026 (91 FR 73551). Here is the scope, the HTSUS numbers it lists, the deposit rule, and what it means for landed cost.